Melt the darkness away with the BULL Series LED Light Bar!

Power – Utilizing powerful CREE™ diodes, BULL Series LED lights use less power than traditional Halogen/HID lights, causing less strain on your vehicle’s electrical system. This light bar’s combo beam pattern offers the most effective light projection for work and recreational driving styles by combining a focused, 30 degree, long range beam, that allows drivers to see further, with a wide 120 degree beam that illuminates unseen objects. Construction – With bottom bracket mounts, polycarbonate lenses, die-cast aluminum, and water proof housing, the BULL Series LED Light Bar is an off-road beast. It is impact proof for the most intense activities. The compact design provides exceptional durability against debris and elements while remaining small enough fit seamlessly with your BULL Series UTV. Each light comes with all necessary hardware, mounting brackets, and color-coded pigtails making installation a breeze.

• 3w High Intensity CREE™ LEDs
• Lumen Output of 9,360
• Combo Beam Light Pattern
• Polycarbonate Lens
• Black Aluminum Die-Cast Body
• Light Color Temperature of 6000K
• Operating Temperature between -40˚F to +140˚F
• Operating Voltage of 10-30V DC
• IP67 Waterproof Rating
• 50,000+ Hours of LED Lifetime
• Comes with all hardware and wiring

Melt the darkness away with the BULL Series LED Light Bar! Power - Loaded with 6 Epistar LED bulbs, the rear LEDs packs more than enough power to handle any lighting need. Construction - Encased in black die-cast aluminum housing with built in heat sink, toughened glass lenses and stainless steel mounting bracket, our LED Lights are extremely resistant to vibration, moisture, impact, wide temperatures fluctuations, and the test of time. Compact and durable with a waterproof rating of IP67, the rear LED lights can handle anything the road can bring and the most versatile work light available.

Features:

• 6 pcs 3 Watt Epistar LEDs
• 6000K Color Temp
• 1150 Lumens
• Operating Temperature between -40°F~140°F
• Operating Voltage of 10-30V DC
• IP67 Waterproof Rating
• Diecast Aluminum Housing Material
• Steel Mounting Hardware
• Ultra Tough Lens
• 50,000+ hours of LED Lifetime
• Comes in pairs with all hardware and wiring

MSA® M25 Rocker wheel with a matching set of EFX® MotoHammer hard terrain tires provide additional ground clearance along with exceptional hard terrain traction. This package will enhance the look and hard terrain performance of your YANMAR UTV. Complete set of 4 wheels and tires mounted and ready to install.

The Bed Rail Accessory Mounts provide quick, convenient and tool-less installation of YANMAR UTV Accessories such as cargo bed box, gun boot mount, and our adjustable bed divider brackets. Mounts directly under the OEM bed rails and also features durable steel construction and no-rust finish bolts. Note: Mounts come in either black or silver finish but are hidden under the fenders and are not visible after installation.

This convenient mount gives hunters a secure location to mount up two full size bow cases in the cargo bed.

• Steel construction with a powder coated, no rust finish
• Mounts to the Bed Rail Accessory Mounts (sold separately) using tool less, quick-connect adjustable levers
• Heavy duty nylon straps secure bow cases to the mount
• Rubber mats at the base of the mount provide a secure foundation for the bow cases once strapped down
• Mount can be used to secure a variety of other items

This durable sun top is designed to withstand the harshest conditions and protects passengers from sun, rain, branches and other brush. Constructed of durable polypropylene, quick-release clamps make the sun top easy to take on and off. Drain channel at the front lip helps rain water runoff; keeping passengers dry. Compatible with other Bull Series accessories.

Protects occupants from rain, wind, mud, and light trail debris. Other features include:

• Quick snap-on/pull-off installation
• Zippers operate in conjunction with doors for easy in/out access
• Windows can be rolled up and secured with straps when not needed
• Made of durable Sur Last® 300 denier nylon and clear vinyl
• Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly
• Highly recommended to be used in conjunction with accessory Rear Window, Folding Windshield, and either Hard Sun Top or Soft Sun Top for maximum cab warmth and weather protection (all sold separately)
• When installed in conjunction with the accessory Folding Windshield and Top (sold separately), it closes the gap and provides a good seal from cold and rain
• All components are rust and UV resistant. Dealer installation recommended (drilling and riveting required)

Mother nature waits for no one. But, no matter the weather, there is always a job to do. That’s why the BULL SERIES CAB HEATER was created. Designed to be installed directly into your YANMAR UTV glovebox, this space heater will battle against even the harshest elements, keeping you comfortable until the job is done.

• Hot water heater includes all necessary parts for mounting
• Electric fan
• Adjustable top vents

NOTE: Dealer installation recommended.

The cargo bed box with 4 cu ft. of cargo capacity, our tough and durable polyethylene cargo bed box securely carries what you need when venturing out in your BULL. It is water and dust resistant and has lockable latches to secure valuables.

Other features include:

Gas shocks on both lids keep lids raised for easy access.

• Attachment points on both lids
• Great for hunters – no reflective surfaces
• Requires the Bed Rail Accessory Mounts for installation, sold separately (factory installed on certain models) See recommended items.

This durable console is made of molded low density polyethylene (LDPE) for exceptional durability.

• Tongue-and-groove rubber gasket lid seal provides a dust and water resistant barrier for contents
• Easily mounts to the center seat location — no tools required
• Large stylized lid provides easy access to contents
• Console includes storage pocket and two cup holders (holds 12 oz. cans up to 20 oz. bottles)
• Storage dimensions: 15.75"L x 11.81"W x 7.09"H

Our center mount mirror features a large 3.8” x 10” convex mirror and plastic injection-molded bracket and mirror housing. Fully adjustable and works with YANMAR BULL Series windshields and sun tops.

This convenient mount gives you a secure location to stow your chainsaw. Frees up cargo bed space and gives you easy, tool less access to your chainsaw while you’re out on a worksite or trails. • Steel construction with a powder-coated, no rust finish.

• Mounts to the Bed Rail Accessory Mounts, sold separately (factory installed on the BULL Series)
• Accommodates up to 18” bars

EXTENDED OVERFENDERS FITS THE FOLLOWING: BULL Series, (YU700G) Longhorn Edition, (YU700GMP) BULL Series Extended Overfenders provide added protection from mud and water utilizing a durable two piece HMWPE plastic and rubber design. These extended overfenders are ideal for use with oversized tires providing an additional 2” of front and 2 ¾” of rear coverage over the BULL Series Over Fender. NOTE: Does not work with Bull Overfender.

Accidents happen. Whether at the camp-site, or the job-site, it’s important to always be prepared. The heavy-duty metal FIRE EXTINGUISHER BRACKET enables you to easily bring your fire extinguisher with you wherever the job takes you, and the nylon straps ensure security and stability. Fire extinguishers are required to carry on a UTV in many riding areas, so be sure to check local rules and regulations before you set out.

• Fits most fire extinguishers up to 3-1/4"
• Attaches to 1-1/4"-2" roll cage tubes

Made from Nyracord® rubber, our Floor Mats are intended for easy mud removal and comfort. They are designed to protect the floor and feature an aggressive lug pattern, reusable push-in shank fasteners, drain holes for mud and water, and a contoured bottom to fit perfectly in your Bull. Easy to remove and clean.

If you use your UTV to traverse through heavily wooded areas, then you need a windshield that protects from more than light debris and the elements. These hard-coated polycarbonate window panels provide advanced protection from flying rocks, tree limbs, and other heavy-duty debris. Its construction material will not shatter like acrylic windshields and is scratch resistant. Because of the shield’s versatile folding design, it is easy to fold down when conditions change. Once folded into its down position, it remains completely secure and impervious to rough terrain or high winds. Easy tool-free removal makes cleaning and maintenance easy and hassle-free.

• Injection molded rubber hood blocks
• Injection molded plastic tool-less clamps
• Windshield-to-hood brackets

The BULL Series Front Receiver Hitch allows the use of standard 2” receiver hitch attachments and provides a secure location for a portable winch. Required for use of the Multi-Mount Winch Mount.

The most heavy-duty winch, and the strongest winch ropes, are pointless accessories without a strong mounting system. The FRONT WINCH MOUNT provides a secure location to install a winch onto your YANMAR UTV. It is molded and welded to attach to, and perfectly fit, the BULL and LONGHORN frames, so that your winch is empowered to work to the best of its capabilities. Made of 3/16” steel sheet metal with a black powder-coat finish – the mount is virtually indestructible, while seamlessly matching your UTV’s overall aesthetic.

• Plug-and-play installation includes mounting plate, and all required cut-to-length wiring, and OEM connectors.
• Compatible with either WARN PRO VANTAGE 3500 WINCH or WARN VANTAGE 3000 WINCH.

Our Gun Boot Mount provides secure transport of one or two Gun Boots. It can be configured with up to three Gun Boot Mounts to carry a total of six gun boots. The design allows you to remove the end portion of the gun boot without removing the entire boot from the mount. Other features include easy access to firearm, adjustable levers to provide quick, tool-less attachment to the bed rail system, three mounting positions, and black wrinkle powder-coat finish designed to match your YANMAR BULL Series UTV.

Protect your BULL and add some style with the Headlight and Taillight Guards. They are made of durable thermo-molded plastic. Installation is simple using 3M™ adhesive tape to mount.

Protect the front of your BULL with our heavy duty brush guard. Designed to fit your BULL’s styling, it installs without having to remove the OEM brush guard and provides ample grill coverage and protection. Other features include a welded steel sheet and tube construction with a power-coat finish, light mounting tabs to easily install accessory lighting, and vertical rubber strips and a winch hook. Looks great with the HEAVY-DUTY HEADLIGHT BRUSH GUARDS (sold separately)

The heavy-duty headlight brush guards make the perfect complement to our heavy-duty brush guard (shown in image). They help keep your headlights protected and operational when exploring the wilderness or working. Welded steel sheet and tube construction and power-coat finish help ensure durability and reliability.

REQUIRED ITEM:

The Integra® Classic tie down incorporates a soft hook extension to the fixed end of the tie down to loop around larger diameter handlebars, frame member, triple tree clamp or other structural point. Overall length is 69", and made with abrasion-resistant nylon webbing and vinyl-coated hooks. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

The Integra® Classic tie down incorporates a soft hook extension to the fixed end of the tie down to loop around larger diameter handlebars, frame member, triple tree clamp or other structural point. Overall length is 69", and made with abrasion-resistant nylon webbing and vinyl-coated hooks. Assembly strength of 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

If you plan on using your winch routinely for plowing, then it’s probably best to hop in league with the big boys straight off the bat. This STEEL CABLE WINCH is meant to recover 4500 lbs. of machinery with ease. The KOLPIN 4500 WINCH was built with plowing in mind. Its internal gears are specifically suited to prolonged towing. Its all-steel, 3-stage planetary gear train makes for reliable and smooth operations. An ergonomic dial is included for free spooling-to-clutch engagement. Heavy-duty load replay, 6-guage wiring, and weather-resistant sealed drums and motor protect your machine, ensuring a long life-span. The center-spool design comes pre-wound with 50’ of steel cable, so you are ready to tow from the moment of installation.

• 5-Year mechanical warranty
• 3-Year electrical warranty
• Automatic mechanical cable drum brake
• Color-coded quick connect the wiring harness
• Premium handlebar mount controls with wiring harness
• 4-way roller fairlead, universal fairlead mount bracket, and hardware included

REQUIRED ITEM:

Winch Mount Kit (Part#YMA-25-5270)

Every snow day feels like a school is cancelled when you are using a KOLPIN SNOW PLOW BLADE. Whether you are clearing a large patch of land, or just need a clean path to your job site, this 60” long, 17” high steel blade gets the job done with ease. It has been stamped and welded to ensure strength, rigidity and power.

• 17” high
• 60” long
• Constructed out of steel

Every snow day feels like a school is cancelled when you are using a KOLPIN SNOW PLOW BLADE. Whether you are clearing a large patch of land, or just need a clean path to your job site, this 66” long, 17” high steel blade gets the job done with ease. It has been stamped and welded to ensure strength, rigidity and power.

• 17” high
• 66” long
• Constructed out of steel

Kolpin Branded 17" height

• Steel Blade is stamped and welded for structural rigidity.
• Compatible with the full line of Kolpin winches

Required items: KOLPIN UTV HIGH RISE™ SNOW PLOW PUSH TUBE

Our UTVs are built to give their passengers plenty of room to spread out and keep the work day comfortable. This allows space to include a BENCH CENTER CONSOLE to provide easy on-the-go access to your gear. The CENTER CONSOLE UNIT is weather resistant so that your gear stays dry and safe from the elements. Two cupholders are molded into the top portion of the console to allow for easy drink storage to keep you hydrated on hot summer days. The unit also comes with lift easy straps so that your stored items become portable for away from the UTV use.

• Heavy-duty
• Black roto-molded
• UV-stabilized LLDPE (linear low-density polyethylene) construction
• Overall Dimensions: 21” l x 10” w x 8” h

• Universal Rubber Blade Flap fits plow blades with widths 48" - 72"
• Keeps snow from flying into your face
• Available in any size from 48" to 72"

Limits inward rope travel to protect the winch from hook damage and eliminate hook rattling

• Two-piece design installs easily on a fully assembled winch
• For use with steel or synthetic winch cables up to 1/2” diameter
• Increases the life of cables, synthetic ropes, and fairleads

The Kolpin Gun Boot is impact-resistant and heavy-duty with thick pile lining

Precisely rotates High Rise™ mounted blades 56° with a push of a button from the comfort of your seat with ergonomic dash/handlebar mounted controls Installs in less than 30 minutes with 5 bolts Self-locking steel gear drive isolates impact to motor and optimizes durability Compatible with any width blade mounted to either the Kolpin® ATV High Rise™ or UTV High Rise™ push tubes Accommodates 48”-72” blade widths REQUIRED ITEMS: KOLPIN 72 INCH STEEL SNOW PLOW BLADE  

One-Handed Grip and Release - Universal Version

The ability to adjust the 2 grips to different widths to accommodate odd shapes makes these extra-versatile.

• Up to 15lbs. of carrying strength for your medium-weight gear
• Heavy-duty nylon with inlaid rubber grip texture
• Quick-release button for one-handed easy access to gear
• Indexed ratcheting grip arm secures items from 1”-4” in diameter
• Heavy-duty base system mounts to tubular or square bars from 5/8"-2" in diameter or to flat, drillable surface
• Kwik-Clip design allows base rotation and easy removal of grips from base if needed
• 4-corner bolting system
• Includes hardware and mounting plates
• Works best on ATV, UTV and boats
• Sold as a pair

The Toughest Rhino Grips Yet - Universal Version Heavy Scoped Rifles, Crossbows, Ice Augers and more are no match for the Pros. Durable cast Aluminum construction with protective rubber over-molding for a carrying solution that delivers maximum functionality and unparalleled strength

• Tilts 160° in 40° increments
• Rotates 360°, tool-free base rotation
• Heavy-Duty base mounts to tubular or square bars from 5/8"-2" in diameter or to flat, drillable surface
• 5-Position tooth-indexed tool-free tilt-angling with infinite rotation
• (2) Heavy-duty rubber straps, hardware and mounting plates included
• Sold as a pair
• 50+ lbs. of carrying strength for your heavy-duty gear.
• Works best on ATV, UTV, Truck, Trailer, Boat and Garage

Replacement straps for the following Kolpin Rhino Grip Pro Products

• 21560 - Rhino Grip Pro
• 21561 - KXP Rhino Grip Pro - ATV
• 21562 - KXP Rhino Grip Pro - UTV

The Most Popular Grip we've every purpose-built - Universal Version XL Grips have been everywhere. They’ve carried medium-weight tools, guns, bows, shovels, rods, axes, and countless other items to every corner of land and sea.

• Up to 15lbs. of carrying strength for your medium-weight gear
• Strong, rubber over-molded heavy-duty nylon and rubber straps securely hold tools, firearms, bows, crossbows, fishing poles, shovels, farm tools, etc and other gear of various configurations
• Tilts 160° in 40° increments
• Base rotates 360°
• Heavy-Duty base system mounts to tubular or square bars from 5/8"-1-3/4" in diameter or to flat, drillable surface
• Tool-free, Kwik-Clip design allows 360° rotation and easy removal of grips from the base if needed
• 4-corner bolting system
• Sold as a pair
• (2) rubber straps, hardware, and mounting plates included

  NOTE: GUNS/HEAVY OBJECTS SHOULD NOT BE CARRIED IN THE FULL-TILT POSITION

The Most Popular Grip times two - Universal Version

XL Doubles give you the time-tested strength of our most popular XL grips, with twice the gear capacity. 20 lbs. of combined gear weight can be spread out, while only using 1 mounting plate. The possibilities of medium-weight gear transport combinations are endless.

• Up to 20 lbs. of carrying strength for your medium-weight gear
• Strong, rubber over-molded heavy-duty nylon and rubber straps allow for secure transport of 2 items
• Tilts 160° in 40° increments
• Base rotates 360°
• Heavy-Duty base system mounts to tubular or square bars from 5/8"-1-3/4" in diameter or to flat, drillable surface
• Tool-free, Kwik-Clip design allows 360° rotation and easy removal of grips from base if needed
• 4-corner bolting system
• Sold as a pair
• (4) rubber straps, hardware and mounting plates included

NOTE: GUNS/HEAVY OBJECTS SHOULD NOT BE CARRIED IN THE FULL-TILT POSITION

SKID SHOES are an important component of protecting your SNOW PLOW BLADE. They also allow you to control the level of snow left on your land after the plowing is complete. This is especially useful for plowing over gravel, or other terrain where a completely smooth after-plow surface is impossible. KOLPIN’S STANDARD SKID SHOE KIT is constructed out of steel with corrosion-resistant plating. They are also incredibly easy to install, so that you can make on-the-go decisions throughout your day regarding their use.  

• Heavy-duty: 7 mm thick
• Includes (2) Skid Shoes and Hardware

SKID SHOES are an important component of protecting your SNOW PLOW BLADE. They also allow you to control the level of snow left on your land after the plowing is complete. This is especially useful for plowing over gravel, or other terrain where a completely smooth after-plow surface is impossible. KOLPIN’S STANDARD SKID SHOE KIT is constructed out of steel with corrosion-resistant plating. They are also incredibly easy to install, so that you can make on-the-go decisions throughout your day regarding their use.

• Standard: 3mm thick
• Includes (2) SKID SHOES and hardware

The newest and most versatile way to securely transport your rifles, shotguns, pistols and ice fishing gear on your ATV, UTV or any flat drillable surface.

• Auto-latching design provides quick secure attachment of any Kolpin Stronghold® products
• Engineered steel bracket for precision angling and attachment to vehicles
• Spring loaded latch with stainless steel spring
• Durable glass-reinforced nylon auto-latch construction
• Universally fits most ATV tubular racks and UTV beds or to any flat surface
• Includes u-bolts and universal mounting hardware

The newest and most versatile way to securely transport your rifles, shotguns, pistols and ice fishing gear on your UTV Bed rails, Roll cages or flat drillable surface.

• Auto-latching design provides quick secure attachment of any Kolpin Stronghold® products to your UTV
• Engineered steel bracket for precision angling and attachment to vehicles
• Spring loaded latch with stainless steel spring
• Durable glass-reinforced nylon auto-latch construction
• Fits up to 2" diameter tubing
• Universally fits most UTV bed rails,UTV roll cages or to any flat(drillable) surface with included hardware
• Includes U-bolts and universal mounting hardware

Largest interior of all Kolpin Gun Boot® cases

• Single-handed entry, hinged lid for quick access to your firearm
• Integrated rubber closure strap
• Lockable to Kolpin Stronghold® Auto-latch mounts and access door
• Removable zippered foam liner
• Integrated carrying handle and integrated feet
• Meets TSA guidelines for air travel
• Secures virtually all firearms up to 52" in length, including attached bi-pods and scopes
• Mount to your ATV or UTV with mounting bracket (sold separately)
• Can be mounted to various vehicles utilizing Kolpin® Gun Boot® mounts: 20710, 30810 (Sold Separately)
• Internal Dimensions: 52" L x 3-3/4" W x 10-1/2" H

Largest interior of all Kolpin Gun Boot® cases Single-handed entry, hinged lid for quick access to your firearm Integrated rubber closure strap Lockable to Kolpin Stronghold® Auto-latch mount (Part# YMA-20170 or Part# YMA-30180) and access door Removable zippered premium soft case with 2 external pockets & rubber muzzle cap. Customizable fit foam inserts and duffel-bag-like carrying straps that provides superior interior protection Integrated carrying handle and integrated feet Meets TSA guidelines for air travel Secures virtually all firearms up to 52" in length, including attached bi-pods and scopes Internal Dimensions: 52" L x 3-3/4" W x 10-1/2" H Mount to your ATV or UTV with mounting bracket (Sold Separately) - See it in action Made in the USA

Secures standard length, 8"-10" Ice augers or Pop-up binds 10" in diameter when collapsed

• Double straps securely hold the auger while also allowing quick access
• Integrated tie down locations for additional securing
• Integrated handle for easy transport
• Versatility allows transport of: collapsible ice houses, hunting blinds, farm tools, fence posts, etc.
• Dimensions: 46" L x 12-1/2" W
• For use with Kolpin Stronghold Auto Latch Mount System (PART# YMA-20710 and YMA-30810) to attach to any Off Road Vehicle (sold separately)
• Made in the USA

• Durable rotomolded construction for superior cold-weather performance.
• Shock-absorbing interior foam secures rods & reels without folding handles
• Secures up to 6 rod combos up to 36” in length
• Integrated tie-down locations for additional securing
• (2) Durable rubber closure straps allow for quick access
• Integrated handle for easy transport
• Lockable
• Dimensions: 39" L x 18-1/2" W x 6" H
• Mount to your ATV or UTV with Mounting Bracket (PART# YMA-20170 or YMA-30810) (Sold Separately)
• Made in the USA

For use with Kolpin Stronghold® Auto-Latch Mount System (PART# YMA-20170 or PART# YMA-30810)) to attach to any Off Road Vehicle (sold separately)

• Includes a removable zippered Impact foam liner
• Secures handguns up to 16" in length and their attached optics
• Single-handed entry utilizing attached lid and integrated rubber closure strap
• Lockable
• Dimensions: 15-1/2" L x 2-1/2" W x 8-1/4" H

Made in the USA

• 12' of 1/4" diameter synthetic rope
• 7050 lb. breaking strength
• Designed for plow lifting applications
• Steel thimble end on rope for easy installation
• Minimal snapback on breakages versus steel cable
• No more curls, kinks or wire splinters
• Lightweight, handles easy and even floats

• 50’ of 1/4” diameter synthetic rope
• 7050 lbs. breaking strength
• Designed to replace factory rope or cable
• Steel thimble end on rope for easy installation
• Minimal snapback on breakages versus steel
• No more curls, kinks, or wire splinters
• Lightweight, orange for high visibility, handles easy and even floats

Impressive lift height with Heavy-duty, mid-mount, dual-pivot articulating frame and 20" wide blade mount platform.

• Integrated Structural Pivot Box is virtually fully assembled from the factory
• Multi Width Blade mounting system allows current Cycle Country blades and the new wider blade support
• Heavy Duty Square Tube Steel Chassis with strategic reinforcements
• Wider mount attachment for increased blade stability
• Robust steel tube reinforcement and stamped blade technology
• Compatible with Kolpin High Rise™ Power Angle to optimize plowing productivity
• Quick attach the front lever to all 34-XXXX under-body mounts for easy install/removal
• Heavily reinforced frame for today's most powerful UTVs

Model-specific design optimized to fit the underside of the YANMAR Bull/Longhorn chassis.

• Compatible with Kolpin® Push Tubes (34-0000 & 34-0070)
• Quick easy installation - Mounting hardware and instructions included

 

The KOLPIN UTV REAR MIRROR was engineered for durability and clear, high-level visibility. The mirror is made of a shatterproof, scratch-resistant, safety acrylic.  Its wide-angle, convex, design increases the field of visibility, ensuring that you are able to operate your YANMAR UTV with the utmost confidence.

• Universal overhead mounting options for 1-1/2” – 2” round tubes or flat drillable surfaces
• Easy to adjust double ball-joint pivot-arm
• Clamp design allows for mounting with a roof installed
• Dimensions: 10” x 3”

To keep the clean cutting edge of your snow plow blade in tip-top shape, you need your WEAR BAR to be straight-razor fresh. KOLPIN offers replacement WEAR BAR that include fastener kits for easy home-installation.

• 3/16” thick
• 2” high

Note: For use with KOLPIN 60” SNOW PLOW BLADES

To keep the clean cutting edge of your snow plow blade in tip-top shape, you need your WEAR BAR to be straight-razor fresh. KOLPIN offers replacement WEAR BARS that include fastener kits for easy home-installation.

• 3/16” thick
• 2” high

Note: For use with KOLPIN 66” SNOW PLOW BLADES

To keep the clean cutting edge of your snow plow blade in tip-top shape, you need your WEAR BAR to be straight-razor fresh. KOLPIN offers replacement WEAR BARS that include fastener kits for easy home-installation.

• 3/16” thick
• 2” high

Note: For use with KOLPIN 72” SNOW PLOW BLADES

If you're looking for a fully-featured UTV winch, Kolpin's Winch Series deserves strong consideration. Available in 2500 lb, 3500 lb, and 4500 lb models, Kolpin winches provide all of the features you have been looking for in an economical, reliable, high-performance winch. Great for plowing and vehicle recovery.

• 5-Year Mechanical Warranty
• 3-Year Electrical Warranty
• Center-spool design
• Internal gearing specifically designed for plowing
• All steel, 3-stage planetary gear train for reliability/smooth operation
• Weather-resistant sealed drums and motor
• Ergonomic dial for free spooling-to-clutch engagement
• Automatic mechanical cable drum brake
• Pre-wound with 50' steel cable
• Heavy-duty load relay to protect the motor
• Heavy-duty 6 gauge wiring
• Color-coded quick connect the wiring harness
• Premium handlebar mount controls with wiring harness
• 4-way roller fairlead, universal fairlead mount bracket, and hardware included
• Industry common 4-bolt mounting pattern

 

REQUIRED ITEM:

Winch Mount Kit (Part#YMA-25-5270)  

By adding the lockable glove box lid you create a secure area to store your items. The glove box lid comes as a complete passenger dash box door and includes lock and key. Easy to install.

Protects occupants from rain, wind, mud, and light trail debris. Other features include:

• Quick snap-on/pull-off installation
• Zippers operate in conjunction with doors for easy in/out access
• Windows can be rolled up and secured with straps when not needed
• Made of durable Sur Last® 300 denier nylon and clear vinyl
• Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly
• Highly recommended to be used in conjunction with accessory Rear Window, Folding Windshield, and either Hard Sun Top or Soft Sun Top for maximum cab warmth and weather protection (all sold separately)
• When installed in conjunction with the accessory Folding Windshield and Top (sold separately), it closes the gap and provides a good seal from cold and rain
• All components are rust and UV resistant. Dealer installation recommended (drilling and riveting required)

An alternative top option for the Longhorn, this soft top has a tough design that includes aluminum support bars for additional reinforcement. It also keeps passengers protected from the elements. Constructed of sailcloth fabric with embossed polyester/cotton Secures to the Longhorn with straps and aluminum support straps

• Mold and mildew resistant with a limited color fade from the sun
• Innovative design minimizes billowing and rattling
• Easy to install
• Prevents water pooling
• No metal snaps that can rust, corrode, and fail over time

This durable sun top is designed to withstand the harshest conditions and protects passengers from sun, rain, branches, and other brush.

• Constructed of durable polypropylene
• Quick-release clamps make the sun top easy to take on and off
• Drain channel at front lip helps rain water runoff; keeping passengers dry
• Compatible with other Longhorn accessories
• Two piece

Relocates the Mud Flaps and enables mounting of both the accessory Mud Flaps and Rear Grab Bar.

These mud flaps are designed to provide additional protection from mud and water. They are constructed from injection molded rubber and steel for durability and offer integrated styling that matches your BULL or Longhorn. Mud flap relocator is also available.

You own a YANMAR UTV, strength and torque have never been your problem. But you can’t ensure that everybody on your team will possess the same power. So, when your teammate is spinning out in the mud, you may need to find it in your heart to lend a helping hand. The MULTI-MOUNT WINCH MOUNT will allow you to securely attach a winch to our UTV for those quick rescue moments, or just your every-day plowing needs. The mount is made from 3/16” steel sheet metal and tubing with a black powder-coat finish.

• Enables secure mounting of a winch into a 2” hitch receiver on all BULL SERIES models.
• Color is consistent with YANMAR UTV style
• Easy to install

 

REQUIRED ITEMS:

Front receiver hitch>>

Winch >>

The Original Tie Downs by ANCRA® set the standard with its features that includes:

• 5-1/2' long
• Constructed of abrasion-resistant nylon webbing
• Premium heavy-duty 1" cam buckle
• Zinc cam and pressure plate to reduce webbing abrasion
• Vinyl-coated hooks
• 1200 lb. assembly strength with 400 lb. working load limit
• Sold in pairs

The Original Tie Downs by ANCRA® set the standard with its features that includes:

• 5-1/2' long
• Constructed of abrasion-resistant nylon webbing
• Premium heavy-duty 1" cam buckle
• Zinc cam and pressure plate to reduce webbing abrasion
• Vinyl-coated hooks
• 1200 lb. assembly strength with 400 lb. working load limit
• Sold in pairs

The Original Tie Downs by ANCRA® set the standard with its features that includes:

• 5-1/2' long
• Constructed of abrasion-resistant nylon webbing
• Premium heavy-duty 1" cam buckle
• Zinc cam and pressure plate to reduce webbing abrasion
• Vinyl-coated hooks
• 1200 lb. assembly strength with 400 lb. working load limit
• Sold in pairs

The BULL Series Overfenders set is made from a durable injected-molded polypropylene material. It provides additional mud and water protection.

WARN Industries, a leader in the winch business, worked with Yanmar to create the Pro Vantage 3500 specifically for Yanmar customers. With a 3500 lb. capacity. This winch is perfect for all Bull and Longhorn models. Winch Mount required for installation. Features include:

• Fully sealed, three-stage planetary gear train, all-metal gear housing and gears
• 50’ of 3/16” wire rope and plow roller fairlead
• Durable corrosion-resistant black finish on hook, tie rods, and body
• No universal wiring and mounts
• Patented roller disc brake for outstanding control while winching
• Limited lifetime mechanical warranty and three-year electrical warranty

The Rat Pak Tie Downs are ideal when greater tensioning power is needed. It incorporates Ancra’s 1" ratchet buckle, nylon webbing, vinyl coated hooks with an overall length of 5-1/2'. Assembly strength is 1200 lb. with a 400 lb. working load limit. (Sold in pairs).

Our Rear Grab Bar mounts to OEM attachment points. Made of 2” tubing with a wall thickness of .065”. It is designed to protect your BULL’s rear area while fitting your BULL’s styling. Black wrinkle powder-coat finish helps ensure long life. Requires Mud Flap Relocator to work in conjunction with Mud Flaps

The Rear Window is made of SurLast ® 70 all-weather, mildew and fade-resistant fabric with a clear 20-gauge polished vinyl window that will not yellow over time. Our window will provide years of added protection from wind, rain, and backwoods debris like brush and leaves. Other features include:

• Anodized aluminum support bar
• Simple installation – secures with straps and zippers
• Designed to fit the Longhorn Edition and not billow or rattle in most conditions
• Compatible with all YANMAR BULL Series bed accessories

Our Side Mirror features a large 4.5” x 8” convex mirror, mirror housing with a ball-and-socket base for adjustability and a plastic injection-molded bracket. Works with the Bull Series Folding Windshield and Wind Deflector.

Our Side Mirror features a large 4.5” x 8” convex mirror, mirror housing with a ball-and-socket base for adjustability and a plastic injection-molded bracket. Works with the Bull Series Folding Windshield and Wind Deflector.

The Snow Plow System by WARN® has been designed from the ground up to be the most versatile, durable, and high-performance plow system on the market. It’s easy to connect. It’s heavy-duty. Simply put, it’s engineered to perform. Key features:

• Fast-connect front mounting allows for a clean and easy fit-up with no tools, no hassle, and no more crawling under the vehicle
• Thick-gauge steel with reinforcing rib, cross member, and boxed design provide outstanding durability and performance
• Large diameter pivot assemblies allow smooth, precise, reliable, long-term performance powder-coated finish that helps shed snow while also designed to hold up in the harshest conditions
• Wide and tall 72” blade is treated with a low-friction powder coated finish
• Replacement pieces also available (sold separately)

Your snow plow is only as strong as the bracket that mounts it. Without that stable base, the weight of your plow, and the resistance it faces, will overpower your UTV causing instability and breakages. WARN’s SNOW PLOW BRACKET works well with side-by-slides. Just purchase one mount bracket and transfer the plow between them as needed. This saves money as you do not need to purchase a different plow for each side-by-side owned.

• All-metal
• Black coated finish
• Installation materials included

  Requires: Show Plow Kit>>

Our 3-Seater Soft Sun Top is made of SurLast ® 70 all-weather, mildew- and fade-resistant fabric to help ensure long life and no-hassle protection from the elements. The included fiberglass support bars prevent water from pooling and also help minimize billowing and rattles. Weather-resistant straps allow you to install simply and quickly without tools.

This 8' section of durable synthetic rope temporarily replaces your wire winch rope for the plow season saving wear and tear on the winch wire rope. It stands up to repeated sharp angle pulls used to lift heavy plows and works on all aluminum drum WARN® ATV and Side-by-Side winches.

The Under Seat Storage Box is made from tough and durable polyethylene. Includes a screw-on cap and provides dust and water-resistant storage under the driver’s seat. Cannot be installed in conjunction with Powered Subwoofer (sold separately).

• Quick On/Off tool-less vibration dampening clamps
• Dual-view lenses for wide viewing range
• Rugged fold-in and break-away design
• (6) inserts to customize vibration dampening 1-3/4”-2” diameter round tubes, as well as Polaris® and Cam-Am® profile tubes
• Both mirror lenses on each mirror are convex, mirror is glass
• Includes Passenger and Drivers side

Notice: that this part will not work with the Full-Folding Windshield.

Adventures in the mirror are closer than they appear!

• Dual-view lenses for wide viewing range
• Rugged fold-in and break-away design
• Included clamps fit 1-5/8" - 2" round tubing and Polaris® and Can-Am® profile tubes
• Low-Profile clamp compatible with most windshields and doors
• Package includes a set of two mirrors (Passenger and driver side)
• Mirror Dimensions: 3.5” W x 10” H

This 60” TOOL BAR is a UTV is built for the ultimate multi-tasker. If you need the flexibility to quickly flip from one implement to another, then the DIRTWORKS® 3-POINT HITCH solves your problems. This item is required to use with DIRTWORKS® implements. Each implement is designed to slide into, or plug into, the tool bar.

• Category ‘0’, 5/8” hitch pins with 20” spacing
• Heavy-duty, black powder coated tool bar
• Allows a quick change from one implement to another

This lift hitch provides the power that you need to attach heavy-duty UTV accessories to your machine with optimal lift and down pressure ability. A 20” integrated tool bar ad 5/8” diameter pins coupled with a durable 1-1/2” square tubing frame make this Lift Hitch one of the most powerful and versatile UTV accessories on the market. Installation is simple – easily installing within minutes with no tools necessary. The product fits any 2” automotive style receiver hitch. Once installed, its fully adjustable lift arms carry 250 lbs. of tool bar lift capacity and 300 lbs. of down pressure capacity. A rocker switch is easily mounted to your dash so that soil depth adjustments can be completed without ever having to leave your seat.

• Category ‘0’ agricultural implement system
• 12v electric actuator lift system with 20-amp maximum draw
• 15” vertical lift at the toolbar
• Requires 48″ or 60″ accessory tool bar (sold separately)

Note: Additional frame support kit may be required, please check out our suspension locks and frame support kits.

Required item: UTV DIRTWORKS® 3-POINT HITCH 60 INCH TOOL BAR

The DIRTWORKS® REAR PLOW BLADE is a durable attachment that can be trusted with even the most obstinate farmland. Its 5-position angling abilities allow you to adjust your plow angle depending on differing soil conditions. Easy one pin mounting installation allows you to change implements with ease while on-the-go. The 13” high blade is replaceable and comes with a reversible wear bar for an extended long life. REAR BLADE PLOWS are perfect for leveling, finish grading, building sites, and much more. When accompanied with a KOLPIN 3-POINT HITCH it applies heavy down pressure that allows for customizable cutting and leveling.

• All-metal
• 13” high blade
• 5-position angling

Required item: UTV DIRTWORKS® 3-POINT HITCH 60 INCH TOOL BAR

•2-in-1 – Blade Scarifier OR as a Chisel Plow •(6) 1/2″ heavy-duty, hardened steel plow teeth to loosen hard packed surfaces such as driveways •Adjustable blade height for various ground types & extra clearance during transportation •Requires both the Kolpin® 3-point hitch and either the 48” or 60” Accessory Tool Bar (sold separately) •As a scarifier it is ideal for loosening material for more efficient box scraper use

Required items: UTV DIRTWORKS® 3-POINT HITCH 60 INCH TOOL BAR

The DISC PLOW takes the agriculture industry to the next level – into a state-of-the-art world where elegant design meets high-level functionality. This kit comes with five adjustable cutting angles to accommodate different types of soil and conditions. Plowing at different angles simultaneously also allows you to work your soil into a fine ground texture perfect for planting.

• Two individual gangs of (4) discs easily attach to the DIRTWORKS® ACCESSORY TOOL BAR
• Live axle and sealed ball bearing design
• Total width: 54”
• Disc diameter: 14″
• Requires both the KOLPIN® 3-POINT HITCH and either the 48” or 60” ACCESSORY TOOL BAR (sold separately)

Note: We recommend the use of a separate ACCESSORY TOOL BAR for mounting convenience of the DISC PLOW SET if you are utilizing other DIRTWORKS ® implements.

Required items: UTV DIRTWORKS® 3-POINT HITCH 60 INCH TOOL BAR, and UTV DIRTWORKS® - HEAVY-DUTY 3-POINT ELECTRIC LIFT HITCH

A cultivator is a highly-useful tool to break up hard-packed soil before plowing or planting. The SOIL S-TINE CULTIVATOR does just that, breaking up compacted ground to provide deeper penetration and more aeration, preparing your soil for the next step of farming.

• (6) 1-1/2″ Agricultural grade Danish S-tines feature reversible sweeps

Required item: UTV DIRTWORKS® 3-POINT HITCH 60 INCH TOOL BAR

No matter how durable and tough a YANMAR UTV is, there is always going to be piece of sharp debris out there lying in wait for an unsuspecting tire. Luckily, the KOLPIN TIRE REPAIR PACK AND AIR PACK AND AIR PUMP was engineered for on-the-go tire repair to keep you on the road, and on the job. The kit includes rubber tire cement, a repair needle, and (5) tire plugs – all stored inside the air pump for convenient storage. The air pump and air hose are all that is needed to inflate your tire, no CO2!

• Compact design for easy transport
• Easily straps to UTUV racks or stores inside the gear box
• Dimensions: 9-12” L x 3” diameter

Compact zippered carry case includes Metric Tools for Trailside repairs 18 Piece Kit Includes:

• 8, 10, 12 and 14 mm Combination Wrenches
• 8" Adjustable Wrench
• 5" Locking Pliers
• Spark Plug Socket (13/16" & 5/8")
• Spark Plug Handle
• Multi-function Screw Driver
• Electrical Tape
• 3,4,5 & 6mm Hex Key Wrench
• Nylon Zip Ties
• Air Pressure Gauge
• Cotton Rag

Our Side Mirror Kit features a two large 4.5” x 8” convex mirrors, mirror housing with a ball-and-socket base for adjustability and a plastic injection-molded bracket. Works with the Bull Series Folding Windshield and Wind Deflector.

No matter how durable and tough a YANMAR UTV is, there is always going to be piece of sharp debris out there lying in wait for an unsuspecting tire. Storage space is never an issue when KOLPIN’S UTV TIRE REPAIR KIT. Everything you need for an emergency patch and inflation fits securely inside a handy storage pouch, which can be stored in an under-seat storage compartment. The kit includes:

• (3) CO2 cartridges
• Regulator/adapter tool
• (5) 4” tire seals
• Tire roughing tool
• Plug installation tool

“C” size chains fit most ATV/UTV models with tire sizes up to 26x10-12 / 26x11-14
•Designed with hardened V-Bars attached to the 4-link 9” cross chains for great penetration and ultimate off-road traction
•Durable steel construction and long lasting zinc plating
•Sold in pairs and includes a plastic carrying case

WARN® Industries, a leader in the winch business, worked with Yanmar to create the Vantage 3000 specifically for Yanmar customers. This winch’s 3,000 lb. capacity is suitable for all Yanmar Bull and Longhorn models. Winch Mount required for installation. Features include:

• Fully sealed, three-stage planetary gear train, composite gear housing with metal gears
• 50' of 5/32" wire rope and roller fairlead
• Durable corrosion-resistant black finish on hook, tie rods, and body
• Patented roller disc brake for outstanding control while winching
• 5-year mechanical and one-year electrical limited warranty from WARN®

72" Replacement Snow Plow Blade

Winch hook straps are a super simple winch accessory that can make your winching a little bit safer. First, a winch hook strap gives you a nice place to grab without worrying if you'll get burrs or metal splinters in your hands. In addition, when you reel in your winch line, you shoul provide a little tension on it to get the line to roll onto the drum nicely. If you're holding the winch hook, winch line, or the ferrule for the loop you risk pulling your hand into your roller or fairlead.

Winch Mount Kit specific for YANMAR Bull & Longhorn UTV's and Yamaha® Viking™ models.

• Sturdy line of winch mount kit provides the hardware necessary to mount a winch to your vehicle and are designed to fit Cycle Country, Kolpin® and other branded aftermarket winches
• Made with 7 gauge steel
• On some winch/winch mount combinations, the roller hawse will be included with the winch

If you work in a high-wind environment, then you know the discomfort of wind-caused job site dust in your eyes. The WIND DEFLECTOR was created with this in mind. Made from the same hard-coat polycarbonate as the FOLDING WINDSHIELD, it is scratch resistant and will not shatter like acrylic windshields. The product was engineered to divert wind and provide protection without forcing you to add frequent cleaning sessions to your day, as your windshield becomes obscured with job site debris.

• Injection molded plastic tool-less clamp installation
• Easy removal for cleaning and maintenance
• Includes lower-edge brackets

Cleans foam and fabric air filters that have been treated with petroleum-based oil or Yamalube Foam Filter oil.

This kit contains dirt-grabbing, water resistant, super-tacky filter oil and a non-alcohol-based heavy-duty, concentrated, detergent specifically developed to clean foam air filters treated with this oil. Yamalube Biodegradable Air Filter Oil can only be washed out with Yamalube Biodegradable Foam Air Filter Cleaner and water. It won’t wash out with gasoline, solvents, or water alone.

32oz Package. Petroleum-based Foam Filter Oil helps to protect against dirt, dust, and water from entering the intake tract, which are very harmful to the life of the engine. Use only with foam air filters treated with this oil, or with any other mineral-based foam filter oil.

32oz Package. Petroleum-based Foam Filter Oil helps to protect against dirt, dust, and water from entering the intake tract, which are very harmful to the life of the engine. Use only with foam air filters treated with this oil, or with any other mineral-based foam filter oil.

Cleans foam and fabric air filters that have been treated with petroleum-based oil or Yamalube Foam Filter oil.

This kit contains dirt-grabbing, water resistant, super-tacky filter oil and a non-alcohol-based heavy-duty, concentrated, detergent specifically developed to clean foam air filters treated with this oil. Yamalube Biodegradable Air Filter Oil can only be washed out with Yamalube Biodegradable Foam Air Filter Cleaner and water. It won’t wash out with gasoline, solvents, or water alone.

Compact zippered carry case includes Metric Tools for Trailside repairs 18 Piece Kit Includes:

• 8, 10, 12 and 14 mm Combination Wrenches
• 8" Adjustable Wrench
• 5" Locking Pliers
• Spark Plug Socket (13/16" & 5/8")
• Spark Plug Handle
• Multi-function Screw Driver
• Electrical Tape
• 3,4,5 & 6mm Hex Key Wrench
• Nylon Zip Ties
• Air Pressure Gauge
• Cotton Rag

No matter how durable and tough a YANMAR UTV is, there is always going to be piece of sharp debris out there lying in wait for an unsuspecting tire. Storage space is never an issue when KOLPIN’S UTV TIRE REPAIR KIT. Everything you need for an emergency patch and inflation fits securely inside a handy storage pouch, which can be stored in an under-seat storage compartment. The kit includes:

• (3) CO2 cartridges
• Regulator/adapter tool
• (5) 4” tire seals
• Tire roughing tool
• Plug installation tool

No matter how durable and tough a YANMAR UTV is, there is always going to be piece of sharp debris out there lying in wait for an unsuspecting tire. Luckily, the KOLPIN TIRE REPAIR PACK AND AIR PACK AND AIR PUMP was engineered for on-the-go tire repair to keep you on the road, and on the job. The kit includes rubber tire cement, a repair needle, and (5) tire plugs – all stored inside the air pump for convenient storage. The air pump and air hose are all that is needed to inflate your tire, no CO2!

• Compact design for easy transport
• Easily straps to UTUV racks or stores inside the gear box
• Dimensions: 9-12” L x 3” diameter

YAMALUBE® FOAM FILTER OIL-16 oz.   16oz Package. Petroleum-based Foam Filter Oil helps to protect against dirt, dust, and water from entering the intake tract, which are very harmful to the life of the engine. Use only with foam air filters treated with this oil, or with any other mineral-based foam filter oil.